http://www.jinxuanalu.com
Home > Products > Aluminum Coil > 1050/1060/1100 Aluminum Coil > Mill Finished Aluminium Coil 008

Mill Finished Aluminium Coil 008

    Payment Type: L/C,T/T,Western Union
    Incoterm: FOB
Basic Info

Model No.1000 Series

ApplicationDecorations

CertificationASTMB

TechniqueOther

Grade1000 Series

TemperOther

Surface TreatmentMill Finish

AlloyAlloy

Additional Info

Productivity5000tons/Year

TransportationOcean

Payment TypeL/C,T/T,Western Union

IncotermFOB

Product Description
 

PVDF Coating
Aluminium Coil
Test Standard Result SGS report
Coating thickness(um) While Double layers
≥24
While Three layers
≥30
25um(Double layers) SHIN1308002047ML
Page 11
Gloss Tolerance While 60°glossy value≥80unit,tolerance±10unit 60°,Value max:24.4
Value min:21.9
Tolerance=2.5
SHIN1308002047ML
Page 8
While 60°glossy value≥20~80unit,tolerance±7unit
While 60°glossy value< 20unit,tolerance±5unit
Pencil Hardness ≥1H 3H SHIN1308002047ML
Page 10
Flexibility of coating While ≤2T,coating no crack or peel off 2T coating no crack or peel off SHIN1308002047ML
Page 6&7
Adhesive property 0 or 1 grade Grade 0 SHIN1308002047ML
Page 4
Impact Resistance coating no crack no peel off coating no crack no peel off SHIN1308002047ML
Page 9
Acid Resistance Surface immersed with 5%HCL(V/V) for 48H without change Without change  
Solvent Resistance Brushing 200 times with butanone no appearance to bottom 10000 SHIN1308002047ML
Page 2&3
Chromatism The coating color is almost the same as confirmed by buyer and seller,the color difference tested by colorimeter between single coating and sample is less than 1.2( ΔE≤1.2),same lot products color difference ΔE≤1.0 0.2
0.3
SHIN1308002047ML
Page 5
Salt Fog Resistance Outside 2mm the line which is scratched,no corrosion and coating peel off no corrosion and coating peel off  
Moisture Resistance Coating change is less than 1 grade after1000 hours  humidity  test less than 1 grade  
Weather Risistance After 2000hours xenon lamp shining test(artificially accelerating ageing test),no powder come into being,glossy keeping rate(after and before test percent rate) ≥85%,color change degree at least reaching to 1 grade 1 grade  
Note:the test is as per China National Standard and Nonferrous Metals Industry Standard for color coated aluminium coil and ACP


Commodity Alloy Temper Thickness
(mm)
Width
(mm)
ID
(mm)
Standard
Foil stock 1145
1235
1200
8011
H14
H16
H18
0.01~0.7 700~2000 ID405/505MM YS/T457
GB/T3880
GB/T3198
Al.strip/foil
for composite panel
1100
3003
H18
HX2
HX4
HX6
HX8
0.026~0.5 1000~2000 ID405/505MM ASTM B209
YS/T431
Al.sheet for shutter 5052 H19 0.13~0.30 300~1300 ID405/505MM GB/T8544
GB/T3198
Al.strip for capacitor 1050
1060
1070
3004
O
H12/H22
H14/H24
0.26~0.50 300~600 ID150/200/300 YS/T727

Product Categories : Aluminum Coil > 1050/1060/1100 Aluminum Coil

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Bonnie Liu Ms. Bonnie Liu
What can I do for you?
Contact Supplier